 |
If you need unwanted water
removed, there is a Prosser® portable electric submersible pump
that can do the job. Prosser Standard Line® pumps offer high
head or high volume performance and are available in over 100
outstanding models.
Heads To: 240 feet
Flows To: 1,400 g.p.m. |
|
 |
The EcoTRAN™ System
preserves groundwater ecology by collecting and grinding
residential sewage in an underground basin and transmitting the
waste under pressure to a remote private or municipal waste
treatment plant. The unit is easily installed and maintained as
well as aesthetically pleasing. Crane Pumps & Systems also
offers comprehensive piping analysis for your projects.
Heads To: 200 feet
Flows To: 55 g.p.m.
|
|
 |
Effluent pumps are designed
for handling dirty water in typical septic tank / effluent
applications. High temperature models are available.
Heads To: 110 feet
Flows To: 130 g.p.m. |
|
 |
Weinman, Deming, Barnes and
Burks versatile, low cost pumps are engineered for use on most
phases of liquid handling. These end-suction pumps are heavy
duty, general purpose centrifugal pumps with heavy wall castings
suitable for many commercial and industrial applications such as
condenser, chilled, and hot water systems in HVAC and process
secondary pumping. High efficiencies, robust case construction
of cast iron, and impeller construction of bronze makes these
pumps an ideal selection for applications that require
easy-to-maintain, reliable, long lasting pumps.
Heads To: 680 feet
Flows To: 4,000 g.p.m. |
|
|
Barnes Pressure Sewer
Systems offer a broad range of customized engineered pressure
sewer basins with reliable and dependable 1 to 7.5 hp grinder
pumps in simplex and duplex configurations to the municipal and
commercial markets. The basins come in a variety of sizes to fit
specific applications with custom control panels, multiple cover
options and many accessories to suit exact needs. Crane Pumps &
Systems also offers comprehensive piping analysis for your
projects. Contact sales for more information.
Heads To: 100 feet
Flows To: 200 g.p.m.
|
|
 |
Barnes UL listed fountain
pumps are the market leader in decorative water applications.
All bronze and stainless steel construction, 1/3 to 1 HP units
available in both 115V and 230V single phase.
Heads To: 55 feet
Flows To: 120 g.p.m. |
|
 |
Barnes grinder pumps are
designed to reduce sewage particles to a finely ground slurry.
The Omni Grind Plus™ features patented two stage technology.
Heads To: 200 feet
Flows To: 100 g.p.m.
|
|
 |
Laundry Tray Systems come complete, pre-assembled with pump, tank, discharge pipe and check valve. Systems can be used to remove water where gravity flow is not available without breaking concrete. Typical applications include laundry sinks, wet bars, dehumidifiers, water softeners and air conditioner condensation.
Heads To: 30 feet
Flows To: 150 g.p.m.
|
|
 |
Barnes Packaged Plumbing
Systems are designed to handle wastes from lavatories, laundry
tubs, floor drains, water closets, etc. and will push the water
from below ground up to where normal drainage will handle it.
Complete packages with basins and controls are available in many
different sizes and configurations.
Heads To: 25 feet
Flows To: 150 g.p.m. |
|
 |
The reliability and
longevity of centrifugal grinder pumps is available in a
replacement "core unit" package that fits directly into E/One®
200 and 2000 Series basins. The centrifugal pump out-performs
the PC pump.
*E /one is a registered trademark of Environment One Corp.
Heads To: 200 feet
Flows To: 28 g.p.m.
|
|
 |
Barnes and Burks
self-priming pumps are designed to meet a broad range of general
and special industrial applications. Base mounted models are
available with motors up to 150 hp, while closed-coupled models
are available from 1/3 to 15 hp.
Heads To: 240 feet
Flows To: 1,750 g.p.m. |
|
 |
Barnes and Crown offer a
broad range of engineered self-priming centrifugal pumps for a
variety of light to heavy-duty wastewater applications. Designed
specifically for unscreened raw sewage or industrial waste
applications.
Heads To: 140 feet
Flows To: 2,750 g.p.m. |
|
 |
Barnes engineered sewage
ejectors are available in 2" & 3" discharge for residential and
light commercial wastewater applications.
Heads To: 95 feet
Flows To: 430 g.p.m. |
|
 |
Barnes Non-Clog series of
pumps are commonly found in applications involving sewage,
effluent, wastewater processing and solids laden media.
Available in both standard and explosion proof applications,
Barnes Non-Clog pumps are constructed of durable cast iron, oil
filled motors providing a pump tough enough to meet almost any
application need.
Heads To: 265 feet
Flows To: 4,600 g.p.m.
|
|
 |
| A Complete selection of
control panels, float switches, rail systems, basins, hatches
and competitive adaptors are available. |
|
 |
Barnes sump pumps feature
low cost, high performance benefits from a rugged, heavy duty
design. With upper and lower ball bearings and a heavy duty cast
iron vortex impeller. Barnes SP33, SP50 and SP75 sump pumps are
robustly designed for long operational life and dependable
service. They are further enhanced by a stainless steel shaft
and heavy duty seal. Barnes sump pumps save time and replacement
costs because they are interchangeable with competing sump pump
models.
Heads To: 33 feet
Flows To: 80 g.p.m. |
|
