|
|
HVAC
| Chilled Water, Condenser Water, Condensate Return, Hot Water applications for high rise buildings. |
 |
|
Burks and Weinman condensate units are designed for automatic return of hot water condensation from radiators, coils, etc. to low and high pressure boilers, or for return of water and other liquids to the overhead tanks of industrial gravity circulating systems. All units are shipped complete, ready for fast, easy installation.
Heads To: 300 feet
Flows To: 225 g.p.m.
| |
 |
|
Weinman, Deming, Barnes and Burks versatile, low cost pumps are engineered for use on most phases of liquid handling. These end-suction pumps are heavy duty, general purpose centrifugal pumps with heavy wall castings suitable for many commercial and industrial applications such as condenser, chilled, and hot water systems in HVAC and process secondary pumping. High efficiencies, robust case construction of cast iron, and impeller construction of bronze makes these pumps an ideal selection for applications that require easy-to-maintain, reliable, long lasting pumps.
Heads To: 680 feet
Flows To: 4,000 g.p.m.
| |
 |
|
Weinman In-line pumps are specifically designed for heating, air conditioning and industrial applications. Suction and discharge nozzles are located 180° apart on the same centerline for mounting directly in a pipe line. This eliminates critical pipe alignment for ease of assembly and minimum pipe strain. The need for costly foundations is eliminated, which guarantees minimum space requirements.
Heads To: 350 feet
Flows To: 1,500 g.p.m.
| |
 |
|
Burks Turbine unique design is engineered for high pressure, low flow applications. The raceway conducts fluid into the impeller and then provides a channel for the liquid to move as it is propelled and energized by the impeller.
Heads To: 350 feet
Flows To: 91 g.p.m.
| |
 |
|
Barnes and Burks self-priming pumps are designed to meet a broad range of general and special industrial applications. Base mounted models are available with motors up to 150 hp, while closed-coupled models are available from 1/3 to 15 hp.
Heads To: 240 feet
Flows To: 1,750 g.p.m.
| |
< |
|
Weinman pumps meet a wide variety of service needs. The L series single-stage and LVM vertically mounted pumps provide large capacity general service pumping. Rugged and reliable, they combine mechanical simplicity with sophisticated hydraulic design. The JD Series multi-stage pumps offer reliable, economical, high head pumping for applications such as boiler feed and booster service. Recognized for their quality, efficiency and excellent life cycle cost, Weinman split case pumps meet the design criteria of: ASTM, HI, ANSI, AISI, SAE and AMSE.
Deming Horizontal split-case single stage; double suction, general purpose pumps are designed for continuous service handling of both hot and cold fluids.
Heads To: 500 feet
Flows To: 7,000 g.p.m.
| |
 |
|
Deming and Weinman General Service Vertical Column Sump Pumps are designed to handle various fluids from drainage water or any liquid waste containing small, non-fibrous solids to larger industrial processes. Their advanced design provides trouble-free service and low-cost operation.
Heads To: 160 feet
Flows To: 1,600 g.p.m.
| |
 |
|
BPV Vertical Multistage pumps provide high pressure pumping while requiring a very small operating space. The wetted parts of these pumps are constructed out of 304 or 316 SS and utilize a standard TC frame motor.
Heads To: 1,350 feet
Flows To: 600 g.p.m.
| |
|
|
|
|
|
|
