Industrial

Dewatering If you need unwanted water removed, there is a Prosser® portable electric submersible pump that can do the job. Prosser Standard Line® pumps offer high head or high volume performance and are available in over 100 outstanding models. Heads To: 240 feet Flows To: 1,400 g.p.m. End Suction ANSI Process All purpose centrifugal pump designed to B75.1 specifications, heavy duty service for liquid ranging from water and light hydrocarbons to heavy slurries. 14 sizes available with high temperature ranges to 600 degrees Fahrenheit. Heads To: 650 feet Flows To: 1,000 g.p.m. End Suction (Frame Mounted / Closed Coupled) Weinman, Deming, Barnes and Burks versatile, low cost pumps are engineered for use on most phases of liquid handling. These end-suction pumps are heavy duty, general purpose centrifugal pumps with heavy wall castings suitable for many commercial and industrial applications such as condenser, chilled, and hot water systems in HVAC and process secondary pumping. High efficiencies, robust case construction of cast iron, and impeller construction of bronze makes these pumps an ideal selection for applications that require easy-to-maintain, reliable, long lasting pumps. Heads To: 680 feet Flows To: 4,000 g.p.m. Inline ANSI Space saving, back pull-out design allows versatile applications in a wide range of industries. Available in 11 size configurations. ANSI pumps meet the dimensional requirements of ANSI B73.2 Heads To: 390 feet Flows To: 1,200 g.p.m. Inline Vertical Weinman In-line pumps are specifically designed for heating, air conditioning and industrial applications. Suction and discharge nozzles are located 180° apart on the same centerline for mounting directly in a pipe line. This eliminates critical pipe alignment for ease of assembly and minimum pipe strain. The need for costly foundations is eliminated, which guarantees minimum space requirements. Heads To: 350 feet Flows To: 1,500 g.p.m. Non-Clog - Dry Pit Deming and Weinman horizontal and vertical dry pit pumps are compact in design to meet a wide range of service conditions. Solids handling pumps are available in 25 size configurations to meet specific requirements. Heads To: 250 feet Flows To: 8,000 g.p.m. Regenerative Turbine Burks Turbine unique design is engineered for high pressure, low flow applications. The raceway conducts fluid into the impeller and then provides a channel for the liquid to move as it is propelled and energized by the impeller. Heads To: 350 feet Flows To: 91 g.p.m. Self Primers Barnes and Burks self-priming pumps are designed to meet a broad range of general and special industrial applications. Base mounted models are available with motors up to 150 hp, while closed-coupled models are available from 1/3 to 15 hp. Heads To: 240 feet Flows To: 1,750 g.p.m. Split Case Weinman pumps meet a wide variety of service needs. The L series single-stage and LVM vertically mounted pumps provide large capacity general service pumping. Rugged and reliable, they combine mechanical simplicity with sophisticated hydraulic design. The JD Series multi-stage pumps offer reliable, economical, high head pumping for applications such as boiler feed and booster service. Recognized for their quality, efficiency and excellent life cycle cost, Weinman split case pumps meet the design criteria of: ASTM, HI, ANSI, AISI, SAE and AMSE. Deming Horizontal split-case single stage; double suction, general purpose pumps are designed for continuous service handling of both hot and cold fluids. Heads To: 500 feet Flows To: 7,000 g.p.m. Sump Industrial Deming and Weinman General Service Vertical Column Sump Pumps are designed to handle various fluids from drainage water or any liquid waste containing small, non-fibrous solids to larger industrial processes. Their advanced design provides trouble-free service and low-cost operation. Heads To: 160 feet Flows To: 1,600 g.p.m. Vertical Multistage BPV Vertical Multistage pumps provide high pressure pumping while requiring a very small operating space. The wetted parts of these pumps are constructed out of 304 or 316 SS and utilize a standard TC frame motor. Heads To: 1,350 feet Flows To: 600 g.p.m. Vertical Process Deming Vertical Process pumps are space saving, always primed, with cantilever shaft, no submerged bearings, and broad capacity range. Heads To: 150 feet Flows To: 3,600 g.p.m.