Marine
Ship building, work boats and dry docks.
 |
|
If you need unwanted water removed, there is a Prosser® portable electric submersible pump that can do the job. Prosser Standard Line® pumps offer high head or high volume performance and are available in over 100 outstanding models.
Heads To: 240 feet
Flows To: 1,400 g.p.m.
| |
 |
|
Weinman, Deming, Barnes and Burks versatile, low cost pumps are engineered for use on most phases of liquid handling. These end-suction pumps are heavy duty, general purpose centrifugal pumps with heavy wall castings suitable for many commercial and industrial applications such as condenser, chilled, and hot water systems in HVAC and process secondary pumping. High efficiencies, robust case construction of cast iron, and impeller construction of bronze makes these pumps an ideal selection for applications that require easy-to-maintain, reliable, long lasting pumps.
Heads To: 680 feet
Flows To: 4,000 g.p.m.
| |
 |
|
Space saving, back pull-out design allows versatile applications in a wide range of industries. Available in 11 size configurations. ANSI pumps meet the dimensional requirements of ANSI B73.2
Heads To: 390 feet
Flows To: 1,200 g.p.m.
| |
 |
|
Weinman In-line pumps are specifically designed for heating, air conditioning and industrial applications. Suction and discharge nozzles are located 180° apart on the same centerline for mounting directly in a pipe line. This eliminates critical pipe alignment for ease of assembly and minimum pipe strain. The need for costly foundations is eliminated, which guarantees minimum space requirements.
Heads To: 350 feet
Flows To: 1,500 g.p.m.
| |
 |
|
Barnes and Burks self-priming pumps are designed to meet a broad range of general and special industrial applications. Base mounted models are available with motors up to 150 hp, while closed-coupled models are available from 1/3 to 15 hp.
Heads To: 240 feet
Flows To: 1,750 g.p.m.
| |
 |
|
Barnes and Crown offer a broad range of engineered self-priming centrifugal pumps for a variety of light to heavy-duty wastewater applications. Designed specifically for unscreened raw sewage or industrial waste applications.
Heads To: 140 feet
Flows To: 2,750 g.p.m.
| |
 |
|
Weinman pumps meet a wide variety of service needs. The L series single-stage and LVM vertically mounted pumps provide large capacity general service pumping. Rugged and reliable, they combine mechanical simplicity with sophisticated hydraulic design. The JD Series multi-stage pumps offer reliable, low cost, high head pumping for applications such as boiler feed and booster service. Recognized for their quality, efficiency and economy, Weinman split case pumps meet the design criteria of: ASTM, HI, ANSI, AISI, SAE and AMSE.
Deming Horizontal split-case single stage; double suction, general purpose pump, designed for continuous service handling both hot and cold fluids.
Heads To: 500 feet
Flows To: 7,000 g.p.m.
| |
 |
|
Deming and Weinman General Service Sump Pumps are designed to handle various fluids from drainage water or any liquid waste containing small, non-fibrous solids to larger industrial processes. Their advanced design provides trouble-free service and low-cost operation.
Heads To: 160 feet
Flows To: 1,600 g.p.m.
| |
 |
|
Deming Vertical Process pumps are space saving, always primed, with cantilever shaft, no submerged bearings, and broad capacity range.
Heads To: 150 feet
Flows To: 3,600 g.p.m.
| |
|
|
|
