 |
|
Burks and Weinman condensate units are designed for automatic return of hot water condensation from radiators, coils, etc. to low and high pressure boilers, or for return of water and other liquids to the overhead tanks of industrial gravity circulating systems. All units are shipped complete, ready for fast, easy installation.
Heads To: 300 feet
Flows To: 225 g.p.m.
| |
 |
|
If you need unwanted water removed, there is a Prosser® portable electric submersible pump that can do the job. Prosser Standard Line® pumps offer high head or high volume performance and are available in over 100 outstanding models.
Heads To: 240 feet
Flows To: 1,400 g.p.m.
| |
 |
|
The EcoTRAN™ System preserves groundwater ecology by collecting and grinding residential sewage in an underground basin and transmitting the waste under pressure to a remote private or municipal waste treatment plant. The unit is easily installed and maintained as well as aesthetically pleasing. Crane Pumps & Systems also offers comprehensive piping analysis for your projects.
Heads To: 200 feet
Flows To: 55 g.p.m.
| |
 |
|
Effluent pumps are designed for handling dirty water in typical septic tank / effluent applications. High temperature models are available.
Heads To: 110 feet
Flows To: 130 g.p.m.
| |
 |
|
All purpose centrifugal pump designed to B75.1 specifications, heavy duty service for liquid ranging from water and light hydrocarbons to heavy slurries. 14 sizes available with high temperature ranges to 600 degrees Fahrenheit.
Heads To: 650 feet
Flows To: 1,000 g.p.m.
| |
 |
|
Weinman, Deming, Barnes and Burks versatile, low cost pumps are engineered for use on most phases of liquid handling. These end-suction pumps are heavy duty, general purpose centrifugal pumps with heavy wall castings suitable for many commercial and industrial applications such as condenser, chilled, and hot water systems in HVAC and process secondary pumping. High efficiencies, robust case construction of cast iron, and impeller construction of bronze makes these pumps an ideal selection for applications that require easy-to-maintain, reliable, long lasting pumps.
Heads To: 680 feet
Flows To: 4,000 g.p.m.
| |
 |
|
Barnes Pressure Sewer Systems offer a broad range of customized engineered pressure sewer basins with reliable and dependable 1 to 7.5 hp grinder pumps in simplex and duplex configurations to the municipal and commercial markets. The basins come in a variety of sizes to fit specific applications with custom control panels, multiple cover options and many accessories to suit exact needs. Crane Pumps & Systems also offers comprehensive piping analysis for your projects. Contact sales for more information.
Heads To: 100 feet
Flows To: 200 g.p.m.
| |
 |
|
Barnes UL listed fountain pumps are the market leader in decorative water applications. All bronze and stainless steel construction, 1/3 to 1 HP units available in both 115V and 230V single phase.
Heads To: 55 feet
Flows To: 120 g.p.m.
| |
 |
|
Barnes grinder pumps are designed to reduce sewage particles to a finely ground slurry. The OmniGrind Plus features patented two stage technology.
Heads To: 200 feet
Flows To: 100 g.p.m.
| |
 |
|
Space saving, back pull-out design allows versatile applications in a wide range of industries. Available in 11 size configurations. ANSI pumps meet the dimensional requirements of ANSI B73.2
Heads To: 390 feet
Flows To: 1,200 g.p.m.
| |
 |
|
Weinman In-line pumps are specifically designed for heating, air conditioning and industrial applications. Suction and discharge nozzles are located 180° apart on the same centerline for mounting directly in a pipe line. This eliminates critical pipe alignment for ease of assembly and minimum pipe strain. The need for costly foundations is eliminated, which guarantees minimum space requirements.
Heads To: 350 feet
Flows To: 1,500 g.p.m.
| |
 |
|
Deming and Weinman horizontal and vertical dry pit pumps are compact in design to meet a wide range of service conditions. Solids handling pumps are available in 25 size configurations to meet specific requirements.
Heads To: 250 feet
Flows To: 8,000 g.p.m.
| |
 |
|
Barnes Non-Clog series of pumps are commonly found in applications involving sewage, effluent, wastewater processing and solids laden media. Available in both standard and explosion proof applications, Barnes Non-Clog pumps are constructed of durable cast iron, oil filled motors providing a pump tough enough to meet almost any application need.
Heads To: 265 feet
Flows To: 4,600 g.p.m.
| |
 |
|
Barnes Packaged Plumbing Systems are designed to handle wastes from lavatories, laundry tubs, floor drains, water closets, etc. and will push the water from below ground up to where normal drainage will handle it. Complete packages with basins and controls are available in many different sizes and configurations.
Heads To: 25 feet
Flows To: 150 g.p.m.
| |
 |
|
Burks Turbine unique design is engineered for high pressure, low flow applications. The raceway conducts fluid into the impeller and then provides a channel for the liquid to move as it is propelled and energized by the impeller.
Heads To: 350 feet
Flows To: 91 g.p.m.
| |
 |
|
The reliability and longevity of centrifugal grinder pumps is available in a replacement "core unit" package that fits directly into E/One® 200 and 2000 Series basins. The centrifugal pump out-performs the PC pump.
*E /one is a registered trademark of Environment One Corp.
Heads To: 200 feet
Flows To: 28 g.p.m.
| |
 |
|
Barnes and Burks self-priming pumps are designed to meet a broad range of general and special industrial applications. Base mounted models are available with motors up to 150 hp, while closed-coupled models are available from 1/3 to 15 hp.
Heads To: 240 feet
Flows To: 1,750 g.p.m.
| |
 |
|
Barnes and Crown offer a broad range of engineered self-priming centrifugal pumps for a variety of light to heavy-duty wastewater applications. Designed specifically for unscreened raw sewage or industrial waste applications.
Heads To: 140 feet
Flows To: 2,750 g.p.m.
| |
 |
|
Barnes engineered sewage ejectors are available in 2" & 3" discharge for residential and light commercial wastewater applications.
Heads To: 95 feet
Flows To: 430 g.p.m.
| |
 |
|
Weinman pumps meet a wide variety of service needs. The L series single-stage and LVM vertically mounted pumps provide large capacity general service pumping. Rugged and reliable, they combine mechanical simplicity with sophisticated hydraulic design. The JD Series multi-stage pumps offer reliable, economical, high head pumping for applications such as boiler feed and booster service. Recognized for their quality, efficiency and excellent life cycle cost, Weinman split case pumps meet the design criteria of: ASTM, HI, ANSI, AISI, SAE and AMSE.
Deming Horizontal split-case single stage; double suction, general purpose pumps are designed for continuous service handling of both hot and cold fluids.
Heads To: 500 feet
Flows To: 7,000 g.p.m.
| |
 |
|
| A Complete selection of control panels, float switches, rail systems, basins, hatches and competitive adaptors are available.
| |
 |
|
Deming and Weinman General Service Vertical Column Sump Pumps are designed to handle various fluids from drainage water or any liquid waste containing small, non-fibrous solids to larger industrial processes. Their advanced design provides trouble-free service and low-cost operation.
Heads To: 160 feet
Flows To: 1,600 g.p.m.
| |
 |
|
Barnes sump pumps feature low cost, high performance benefits from a rugged, heavy duty design. With upper and lower ball bearings and a heavy duty cast iron vortex impeller. Barnes SP33, SP50 and SP75 sump pumps are robustly designed for long operational life and dependable service. They are further enhanced by a stainless steel shaft and heavy duty seal. Barnes sump pumps save time and replacement costs because they are interchangeable with competing sump pump models.
Heads To: 33 feet
Flows To: 80 g.p.m.
| |
 |
|
BPV Vertical Multistage pumps provide high pressure pumping while requiring a very small operating space. The wetted parts of these pumps are constructed out of 304 or 316 SS and utilize a standard TC frame motor.
Heads To: 1,350 feet
Flows To: 600 g.p.m.
| |
 |
|
Deming Vertical Process pumps are space saving, always primed, with cantilever shaft, no submerged bearings, and broad capacity range.
Heads To: 150 feet
Flows To: 3,600 g.p.m.
| |
