|
|
Vertical Multistage
The Burks BPV Series is designed to meet the needs of most HVAC, OEM and Industrial applications that require water and other heat transfer liquids to be transported at pressures up to 1350 feet TDH. This series pumps from 5 to 600 g.p.m.
Some of the key applications that these units thrive in are booster packages, boiler feed systems, and water treatment systems, as well as the other examples listed below. The wetted parts of these pumps are constructed out of 304 or 316 SS and utilize a standard TC frame motor. The BPVF and BPVSF units have cast iron collar flanges while the BPVCF has a cast iron base with rigid cast iron flanges.
|
| BPV Series |
| 600 g.p.m. |
| 1350 feet |
| 4 inches |
| 1/4 - 60 |
| 120, 240, 480 |
| 1750 or 3450 |
| 2 inches |
Booster Systems
Boiler Feed
Water Treatment
Sprinkler Installations
Car Wash
Fire Fighting
Cooling Water Transport
Marine Applications
Chemical Industry
Processing Industry |
High Efficiencies
Stainless Steel shaft - Double flat face shaft provides long lasting impeller/shaft drive integrity
Suction/Discharge Casing - Entire housing made of stainless steel. Flange connections are available in all sizes • Victaulic connections and oval flanges with femail NPT connections
Stainless Steel diffuser - Special design reduces internal losses, which improves the efficiency of the pump
Sleeve Sealing - Sleeve construction ensures total compensation for thermal expansion • Specially shaped O-ring grooves for optimal sealing
Bleed Plug - Specially engineered to ensure safe purging of air
Interchangeability / Durability - The BPVCF configuration is dimensionally interchangeable with the BPVF series. It is equipped with EPDM E-425 can O-rings for fail-safe operation during extreme temperature changes
Long lifetime electric motor - Wide choices in voltages, frequencies, and enclosures • Insulation class F • Improved efficiency • Temperature protection
Optional thrust bearing housing - For use with standard C-face motors
Shaft seal - Replaceable without disassembling the pump • Optional cartridge seal • Large choice of elastomers and seal materials
Cast pump foot - Solid • Easy connection • VC with rigid flanges • V and VS cast iron collar flanges, stainless steel optional
Smart plugs - For filling, draining, de-aerating and measuring • Separate measurement of suction and discharge pressure ("delta" p) • Draining without residue • Multi-use O-ring sealing
Hydraulic assembly - VC and V: stainless steel AISI 304 • VS: stainless steel AISI 316
Solid construction shroud - Stainless Steel, reinforced shroud • High pressure resistant exterior • Low noise and vibration levels
Solid base plate - Powder coated 4mil. • Optional stainless steel base • Universal connection
|
| BPV Series available in 304 SS and 316 SS
|
|
|
|
|
|
