Vertical Process Pumps
Deming Vertical Process pumps are space saving, always primed, with cantilever shaft, no submerged bearings, and broad capacity range.
Series 5560 |
|500 g.p.m (Series 4310-11),|
3,600 g.p.m (Series 5560)
|100 feet (Series 4310-11), |
150 feet (Series 5560)
|1 -3 inches (Series 4310-11), |
1 -10 inches (Series 5560)
|.25 - 7.5 (Series 4310-11), |
1 - 75 (Series 5560)
|1150 or 1750 |
Metal and Parts Washing
Paint Systems Plating
Casing - Vertically split, end suction design. Double volute type on pumps with 3” and larger discharge.
Impeller - Series 5560 pumps have semi-open type impeller with heavy vanes for outstanding performance. Back pump-out vanes on a semi-open impeller reduces pressure behind the impeller and limits axial thrust.
Power Frame - Heavy duty, one piece cast iron, precision bored and machined to assure alignment of the rotating assembly. Series 43 10-11 pumps are short set design. Series 5560 are available in 9”, 1 2”, and 1 5” extension lengths below the support plate.
Shaft - High strength shaft is extra heavy for maximum loads with minimum deflection. Impeller is keyed to shaft and locked with impeller nut or large cap screw.